Top » Catalog » Aor Japan »


AOR AR-8600

AOR AR-8600
The AR8600 Mark2 is an amazingly versatile receiver which can be used mobile, base or trans-portable... powered from an external 12V d.c. power supply, 12V vehicle or from an optional internally fitted NiCad battery pack. Due to continuous development of our products, the AR8600 Mark2 has been enhanced in several areas. The upper frequency range has been extended to 3000MHz (3.0GHz), lower band sensitivity has been increased (now officially covering to 100kHz) with an enhancement to short wave performance by the addition of further bandpass filters and selection of alternative I.F. filters. Mini-Circuits RMS1 / RMS2 mixers have been employed with active SPM aerial switching devices (not diode-switching) abundantly employed throughout the signal path. The AR8600 Mark2 provides remarkable short wave performance, making other similar wide band competitors mediocre by comparison. Portable operation is a reality, when the optional BP8600 battery is fitted, several hours operation is provided away from the base or vehicle power supplies. All mode receive capability is provided including Single Side Band with programmable tuning steps down to a resolution of 50Hz with the frequency established by a highly accurate Temperature Compensated Crystal Oscillator (TCXO). An RS232 port further extends the capabilities with free supporting control software available from the AOR web sites. Many microprocessor features have been adopted from the trendsetting AR8200 Series-2 hand portable receiver, with the addition of a lamp dimmer and squelch operated lamp. The AR8600 Mark2 RF front-end is an all new design with additional RF bandpass filters, sharper I.F. filters, SPM aerial switching devices for minimal signal path loss and Mini-Circuits mixers. RF preselection is provided through the crowded areas of VHF and UHF to ensure the highest levels of adjacent channel rejection with software spurii cancellation. In addition to a hinged telescopic whip aerial, the AR8600 Mark2 is supplied with a detachable plug in medium wave bar aerial which locates on the rear chassis of the receiver for localised medium wave monitoring. An additional BNC socket is mounted on the rear chassis so that 10.7MHz i.f. output may be extracted for use with external spectrum display and vector analyser units such as the AOR SDU5500. Centre stage is a custom multi-section back-lit LCD, numeric keypad, navigation keys, rotary tuning control and separate controls for volume and squelch control, the LCD can also display alpha-numeric text comments. The all important 8.33 kHz airband channel step is correctly implemented (eight-and-one-third, 33, 66, 00). Channel steps are provided in a menu and may be programmed. Step may be programmed by the operator in any receive mode using multiples of 50 Hz in any mode (i.e. 5 kHz, 12.5 kHz or even 1.25 kHz). Extensive step-adjust and frequency offset facilities are also provided (as per AR5000) to ensure tracking of the most obscure band plans, AFC (Automatic Frequency Control) is included for spot on tuning ensuring that nothing is missed. A meaningful band plan is factory programmed specific to market area, this ensures that the AR8600 Mark2 automatically selects the correct receive mode and tuning step (although mode and tuning step may be manually selected at any time), the band plan may be edited via computer control. A group of four front panel navigational keys provide a natural and intuitive path through the on-screen menus. Tuning is primarily accomplished via the main tuning dial, arrow keys and keypad. The back-lit LCD with contrast control provides operational data with the ability to add 12 character text comments to each memory channel, memory bank and search bank, a text search feature simplifies identification and recall of stored information. Many text prompts aid operation making programming of search banks etc straight forward. Two frequencies may be displayed along with operating legends and high resolution signal meter and multi-function band scope. The band scope provides adjustable span width from 10 MHz to 100 kHz , you can move the marker, operate peak hold, transfer the marker frequency to VFO and save trace for later recall. Flexible dynamic memory bank layout is provided (memory banks may be varied in size between 10 and 90 channels each i.e. bank ΅AΆ 80 channels / bank ΅aΆ 20 channels with bank ΅BΆ 40 channels / bank ΅bΆ 60 channels etc). A total of 1,000 memories are provided in 20 memory banks, lockout, select scan, priority and auto store are also provided. In addition 40 search banks are provided with 50 pass channels per search bank and a further 50 for VFO search lockout. Comprehensive edit, move, swap and delete facilities are provided, it is possible to move whole memory & search banks. In addition you may write PROTECT memories, banks and search banks to prevent accidental over-writing of stored data including protection of the entire receiver! Scan & search rates provide a maximum of approximately 37 increments per second. Flash-ROM memory storage ensures that data is automatically saved without the need for a backup battery or capacitor. Computer control is available via a standard 9-pin RS232 D-type connector on the rear chassis, just a standard RS232 cable is required for connection to a PC, the extensive RS232 command list is printed in the operating manual. A FREE software package is available as a download from the AOR web sites, this provides frequency control & management, searching, scanning, logging with support for geographic data from a GPS and audio recording to disk. Spesifications Frequency coverage 100 kHz ~ 3000 MHz no gaps. All mode reception with Super narrow FM plus Wide and Narrow AM in addition to the standard modes. True carrier re-insertion in SSB modes. New front end with RF preselection of VHF-UHF bands. Detachable MW bar aerial. Tuning steps programmable in multiples of 50 Hz in all modes, 8.33 kHz airband step correctly supported. Step-adjust, frequency offset, AFC. Noise limiter & attenuator. Versatile band scope with save trace facility. Twin frequency readout with bar signal meter. Separate controls for volume & squelch. Write protect & keypad lock, lamp dimmer. Programmable scan & search including LINK, FREE, DELAY, AUDIO, LEVEL, MODE. RS232 computer socket. Flash-ROM memory (no battery required). Slot card sockets. BNC socket for 10.7MHz i.f. output.

Quick Find
Use keywords to find the product you are looking for.
Advanced Search
Ελληνικά English
0 items
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Find our store