The new DR-435E transceiver has been improved to offer additional stability and operation choices.
With 100 memory channels and full package of standard features.
As a result of these improvements, AlincoΆs monoband DR-435E is fully compatible with the dyal band DR-620 mobile / base and the DJ-596 / 593 handheld transceivers. In addition, DR-435E is easy to program and operate, featuring a large alphanumeric display, a remote control through the backlit microphone key pad and include CTCSS and DCS selectable calling and reception.
Choose the optional EJ-47U module for the 10F3 digital voice or the EJ-41U for the 1200 and 9600 bps packet operations.
You can engage in geolocation activities by connecting a GPS and/or a computer theat runs APRS or similar software.
You donΆt have to wait for dedicated digital transceivers to arrive.
Alinco gives you the choice of analog or digital today.
EJ-41U internal TNC board is available as an option for 1200/9600bps packet
35 watts, H/M/L power settings
100 memory channels
Front panel data port
Rear panel DSUB9 computer connection
No need to remove mic for packet operation
Ignition key on/off feature
CTCSS, DCS encode+decode, DTMF encode and Tone-burst are all standards
Clean, clear Alinco audio
Super-wide 7 character alphanumeric display
Wide and narrow FM modes (16K0 & 8K50F3E)
Theft alarm feature
A large, palm-fitting commercial-grade backlit microphone with a metal connector (not a modular plug) as well as direct frequency input and direct multi-function access such as monitor, call channel, power setting, memory to VFO plus more!
Stays in mode you select (voice/packet) through
power off cycles
Ten autodial memories
Frequency range: 430.000 - 449.995 MHz
Operating mode: Narrow-FM, FM
Frequency resolution: 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 KHz
Memory channel: 100 channels + 1 call channel
Ant. Impedance: 50 ohm unbalanced
Frequency stability: +/- 5 ppm
Microphone impedance: 2K ohm
Rated voltage: 13.8 VDC +/- 15% (11.7-15.8V)
Current: Transmit: approx. 10.0A, Receive: approx. 600mA (Max) 400mA (Squelched)
Operating temperature: 10dig.C to +60dig.C
Ground: Negative ground
Dimensions: 142(W) x 40(H) x 174(D) mm
Weight: Approx. 1.0Kg
Power output: 35W (HI), 10W (MID), Approx. 5W (LOW)
Modulation: Variable reactance
Spurious emission: -60 dB or less
Maximum frequency deviation: +/- 5 KHz / +/- 2.5 KHz (Narrow mode)
Circuitry: Double-conversion superheterodyne
Sensitivity: -12.0 dBu (0.25uV) or less (12dB SINAD)
Intermediate frequency: 1st IF 30.85MHz, 2nd IF 455 KHz
Squelch sensitivity: -16.0 dBu (0.1 uV)
Selectivity: (-6 dB) 12 KHz or more
6 KHz or more (Narrow mode)
Selectivity: (-60 dB) 28 KHz or less
14 KHz or less (Narrow mode)
Audio output: 2.0 W (8 ohm, 10% distortion)